
Pivot Points Trading Strategy
Trading Indicators • 13 min
The Rate of Change (ROC) is a price-based indicator designed to measure the rate at which the price changes from one period to another. The measure of the current price in relation to a defined look-back period is the typical rate of change definition. However, when expressed as a percentage, ROC can help traders determine not only momentum, but also overbought and oversold conditions as well as the trend direction. ROC is a momentum oscillator; other indicator types similar to ROC include MACD, RSI and ADX.
Any financial asset can theoretically advance indefinitely, but the maximum drop is to zero. This essentially means that while negative ROC values have a limit, positive ROC values are unbounded.
ROC is calculated in such a manner that traders can assess how the price has changed compared to a defined look-back period. The rate of change formula is as described below:
ROC = [(Current Close - Close n periods ago) / (Close n periods ago)] X 100
*Where ‘n’ is a ‘user’ defined number representing the number of periods ago that the price is being compared to.
The default ‘n’ on most platforms is 14, but 9 and 25 are also common among many traders. In many cases, longer-term traders usually select a period as large as 200. While a smaller number will react to prices faster, it may lead to choppy or false signals. On the other hand, a larger number will react slowly to price changes (the ROC will be smoother), but this may lead to more reliable signals when they occur. It is important to understand the volatility nature of the underlying asset to be analysed. As well, traders can also use shorter ‘n’ values on higher timeframe charts, such as daily and above; and longer ‘n’ values on lower timeframe charts, such as 1 hour and below.
With ROC seeking to compare prices from a past defined period, the indicator values will either be above zero or below it. Zero will act as the centreline. When indicator values hover around zero, it will denote a consolidating market. A reading above zero will imply a bullish sentiment in the market; whereas a reading below zero will imply a bearish sentiment in the market. Although used as an oscillator, the ROC has no defined overbought and oversold levels. Traders pick out such zones by observing the prior extreme levels the ROC printed about the price of the underlying asset.
Momentum indicators help traders gauge the strength and speed of price movements but each has its own quirks. The Rate of Change (ROC) indicator measures the percentage change between today’s price and the price n periods ago. In contrast, the Relative Strength Index (RSI) gauges overbought or oversold conditions by comparing average gains to average losses, while the Moving Average Convergence Divergence (MACD) tracks the difference between two exponential moving averages.
Sensitivity to price swings:
Because ROC is a raw percentage change, it responds immediately to sudden price moves, making it ideal when you need a timely alert to breakouts or reversals. RSI’s smoothing can delay signals, and MACD’s reliance on moving averages adds further lag.
Signal clarity:
ROC crosses above/below zero cleanly mark momentum shifts, whereas MACD lines and histogram readings can be more complex to interpret. RSI’s 70/30 thresholds can be misleading in strongly trending markets, while ROC stays centred on zero.
Divergence detection:
All three can spot divergence between price and momentum, but ROC often highlights divergence sooner useful for catching early exhaustion in strong trends. RSI divergence may persist longer, and MACD divergence can be muddied by smoothing.
Relying on ROC alone can lead to false signals in choppy, range-bound markets. It’s best used in conjunction with a trend filter, such as a 50-period moving average, or confirmed by volume surges.
Why not test ROC on a live chart? Open a demo account with AvaTrade and add ROC alongside RSI and MACD to see which momentum tool suits your strategy best.
Here is how to trade the signals generated by the ROC indicator:
Overbought and Oversold Conditions
Momentum indicators are particularly ideal for trading ranging markets because they help forecast turning points accurately. Momentum generally refers to a trend continuing its course, and in a ranging market, if a trend starts to lose momentum, it is best to start looking for opportunities to trade in the opposite direction. Peaks and troughs can occur after a certain time has elapsed or when a certain percentage move has been made. As an unbound indicator, ROC gives a clear picture of when to anticipate such turnarounds based on previous printed indicator levels.
Breakouts
Breakouts occur with strong momentum, and what better indicator to qualify breakouts than the ROC. When the price is consolidating or ranging, ROC will print flat values. A sustained sharp rise or fall will confirm that the breakout trend will be sustained going forward.
Zero Line Crosses
A zero-line cross on the ROC is an indication that a new trend is forming. A cross of the zero-line from below indicates that a bull trend is now in place, whereas a cross from above indicates that a downtrend is now in place. As mentioned above, it is important to consider the asset volatility and timeframe chart to minimise false or whipsaw ROC signals that come from zero-line crosses.
Divergences
Divergences are great for timing market turning points, and with the ROC being a momentum indicator, it can deliver accurate and compelling divergence signals. Bullish divergence will occur when the price is forming lower lows, but the ROC is printing higher lows. This will be a signal that the downtrend lacks momentum and a trend change to the upside is about to occur. Similarly, a bearish divergence will occur when the price is forming higher highs, but the ROC is printing lower highs. This will be a signal that the uptrend lacks momentum and a trend change to the downside is about to occur. It is important to note that sometimes, a divergence signal may take a little longer to play out, and it is important to seek confirmation from other tools or even price candlesticks to identify optimal trade entry points.
Traders can harness the ROC indicator for clear entry and exit signals by following methodical, real-price examples. Below are two step-by-step trade setups, illustrating how varying the look-back period alters sensitivity and the likelihood of false signals.
Even the most robust momentum strategy can falter without proper risk controls. Here’s how to avoid costly mistakes when trading with ROC.
The ROC indicator excels under certain market regimes and asset classes, but can mislead in others. Understanding when to deploy ROC ensures you capitalise on its strengths and avoid its weaknesses.
As pointed out above, ROC may sometimes deliver early or late signals. It is, therefore, important to seek effective indicator combinations with the ROC that will help generate confluence signals.
Here are some of the best ROC indicator combination strategies:
ROC and Stochastics
This combination is best for timing trend reversals. When the ROC delivers a divergence signal, traders can watch out for stochastic crosses in overbought or oversold zones to pick out optimal entry points in anticipation of a trend change. For instance, in the case of a bullish divergence, the best entry point would be a stochastic cross in oversold territory.
ROC and Moving Averages
The ROC zero-line cross can sometimes deliver vague signals to confirm a trend change. To confirm trend reversals, traders can combine the ROC with two moving averages. For instance, when the ROC has just crossed the zero-line from above to signal a downtrend, additional confirmation will be received when the faster-moving average crosses the slower moving average downwards.
Context
During Aetna’s rally from April 2009 to April 2010, stock price action featured a clear uptrend with a series of higher highs and higher lows.
Traders used ROC(12) to identify short-term oversold levels as opportunities to rejoin the prevailing uptrend, while ignoring overbought signals because the larger trend remained intact.
Setup & Observations
Outcome
Key Lesson: In a sustained uptrend, ROC (especially on a 12-period setting) can serve as a precise timing tool for entries on pullbacks provided traders ignore overbought extremes and prioritise the primary trend.
Experience how ROC would have handled real historical moves open a demo account with AvaTrade and apply ROC alongside trend filters to back-test these insights on past data.
Here is why you should trade using the ROC indicator at AvaTrade:
Open your trading account at AvaTrade or try our free demo account!
The ROC indicator is shorthand for Price Rate of Change Indicator. It is a momentum based indicator that measure the percentage change in price, thus giving traders insight into how rapidly price is rising or falling. The obvious takeaway is that the faster price is changing the stronger the momentum of the trend. The indicator is commonly used to spot overbought and oversold conditions, divergences, and centerline crossovers. Because the indicator is prone to whipsaws it is best used as a confirming indicator.
Since the ROC indicator is a momentum indicator displayed as a histogram it is very easy to read and interpret. When it is above zero it shows upward price momentum, and when it is below zero it indicates downward price momentum. The further away from zero the indicator moves, the stronger the momentum of the price move. Traders can use this information either to confirm trend changes, or to inform them when a trend is gaining or losing momentum. The ROC is considered to be a confirming indicator and is typically used in conjunction with other indicators.
The ROC Indicator is typically used to confirm price moves or detect divergences, as well as being used to determine when markets are overbought or oversold. Reading the ROC indicator is fairly simple. When it is above the zero line and moving higher it indicates the trend is getting stronger. However if it rises too far, say to the +3 level, that could indicate an overbought market. If it is falling back towards the zero line it indicates slowing momentum and a potential change in trend. The same is true but reversed when the indicator is below zero.
** Disclaimer – While due research has been undertaken to compile the above content, it remains an informational and educational piece only. None of the content provided constitutes any form of investment advice.